Angebot!

Retro Ketan Plug In Pendant Light

Ursprünglicher Preis war: €162.45Aktueller Preis ist: €40.61.

Artikelnummer: DCP-C4214-01 Kategorie: Schlagwort:

Beschreibung

Inspiration

The Retro Ketan Plug-In Pendant Light is built the old way: colored glass cut by hand, wrapped in copper foil and soldered panel to panel, so the seams stay visible as part of the pattern. Kept small — under eight inches — it behaves less like a ceiling fixture than like a lantern, and the floral motif reads properly only once the bulb is behind it, throwing amber, pink and blue across whatever sits below.

Key Features

Soldered Stained Glass Shade
Hand-cut colored glass panels joined with copper-foil seams into a floral motif, bordered by a scalloped art-glass hem and brass frame.
Plug-In Swag, 2 Hooks
The braided cord drapes through two included ceiling hooks and ends in a standard US plug — no junction box, no electrician.
Inline On/Off Switch
A switch on the cord between shade and plug turns the light on and off — no wall switch needed on the circuit.
Product Size

DimensionsØ 7.8″ × H 6.8″ / Ø 20 × H 17.5 cm
Cord Length177″ / 450 cm (adjustable swag)
Retro Ketan Plug-In Pendant Light dimensions
Specifications

Materials & Finish
Soldered stained glass shade in amber, pink, blue and green · Brass frame · Brown braided cord
Light Source
1 × E14 small screw base · 15W max · 3000K warm bulb included · A warm-toned bulb gives the strongest stained-glass glow
Cord, Plug & Switch
177″ (450 cm) braided cord, drapeable for a swag · Standard US two-prong plug · Inline on/off switch between shade and plug · 2 ceiling hooks included
Installation
Plug-in swag, no hardwiring — one hook above the shade, a second near the outlet, cord draped through both · Renter-friendly and reversible
Rating
Indoor · Dry locations only — not for bathrooms or covered outdoor areas
Care
Dust the glass panels and brass frame with a soft dry or barely damp cloth · Never soak leaded glass
Certification
Certified: North America · Australia · Europe · Middle East
Best For
Bedside, breakfast nook, reading nook, entryway console · Accent light rather than a room’s main light
Design Style
Vintage Cottagecore Eclectic Art Nouveau-Inspired Boho
Use Case

At 7.8″ with a plug-in cord, the Retro Ketan suits spots where ceiling wiring isn’t an option — apartments, rentals, or any wall without a junction box. Use the two hooks to drape the cord out from a corner and hang it beside a bed as a bedside reading pendant, over a side table in a reading nook, or above an entryway console. The leaded panels cast amber, pink and blue rather than flooding the room, so treat it as an accent alongside other lighting.

Downloads

Technical reference and setup guides for the Retro Ketan Plug-In Pendant Light. For files marked pending, .

Spec Sheet
Full Product Specs · PDF
Setup Guide
Swag Hook & Plug-In · PDF
Pending
Care Guide
Stained Glass & Brass · PDF
Pending
FAQ

Does it need hardwiring or an electrician?
No. Drape the cord through the two included ceiling hooks — one above where the shade should hang, one near the outlet — and plug it into a standard wall socket. No junction box, no electrician, and fully reversible, so it suits renters.
Is a bulb included, and which type?
Yes — a 3000K warm white bulb is included. It takes one E14 small screw base up to 15W. E14 is the smaller European candelabra size rather than the standard US E26, so pick up E14 replacements specifically; they’re stocked on Amazon and at most lighting suppliers.
Can I use it in a bathroom, and how do I clean the glass?
No — it’s rated for indoor dry locations only, so keep it out of bathrooms and covered outdoor areas. Clean by dusting the panels and brass frame with a soft dry or barely damp cloth; don’t soak leaded glass.

Zusätzliche Informationen

Gewicht 3 kg
Size

Dia 20cm x H 17.5cm / ∅ 7.8″ x H 6.8″

Colour

Colorful

Plug Options

US Plug, UK Plug, AU Plug, EU Plug