Beschreibung
Inspiration
The Cantilever Wall Light borrows its idea from engineering: a cantilever holds weight out in the air, supported at only one end. We set a simple sphere on a short, angled arm so it seems to lean away from the wall, caught mid-balance like a ball about to roll off a ledge. The geometry is plain; the tilt is what gives it its sense of play.
!
Installation Note
Not designed for US junction boxes (J-Box). Requires direct hardwiring by a licensed electrician. Please consult an electrician before purchasing.
Not designed for US junction boxes (J-Box). Requires direct hardwiring by a licensed electrician. Please consult an electrician before purchasing.
Key Features
Off-Balance Cantilever
An angled arm sets the sphere out from the wall for a playful, tilted silhouette.
Resin & Glass Sphere
A compact 8cm form in pink, black, white or gray resin with glass.
Damp Rated
Suitable for bathrooms and covered outdoor areas as well as living spaces.
Size & Fit
| Size | Dia 8cm x H 20cm / Ø 3.1″ x H 7.9″ |
Specifications
Fixture Type
Wall light · 1 light
Materials
Resin body; glass
Finish
Pink, black, white or gray
Light Source
1 × G9, 5W max · bulb included · dimmer compatible (dimmer not included)
Installation
Direct hardwire by a licensed electrician · not designed for US junction boxes (J-Box)
Rating
Damp rated · bathrooms and covered outdoor areas
Certification
Certified: North America · Australia · Europe · Middle East
Design Style
Best For
Bathroom, bedside, hallway, kids‘ room, or covered porch
Downloads
Need a doc that’s not listed? .
Spec Sheet
Dimensions & details · PDF
Install Guide
Setup instructions · PDF
FAQ
Can I use it in a bathroom or outdoors?
Yes. It’s damp rated, so it suits bathrooms and covered outdoor areas such as a porch. Avoid spots exposed to direct rain or spray.
What bulb does it use?
One G9 bulb up to 5W, included. G9 is a small two-pin base, not screw-in, so buy G9 replacements specifically.
Can I dim it?
Yes. It’s dimmer compatible (dimmer not included); use a dimmable bulb if you replace it.
How is it installed?
It must be hardwired directly by a licensed electrician; it is not designed for US junction boxes (J-Box). Please consult an electrician before purchasing.
