Beschreibung
Inspiration
This wall sconce started from the swing cranes on old workshop walls and harbor sheds, a single long arm hinged at the wall and held up by one taut wire running back to a point above it. Workers swung the arm out over whatever needed lifting, then pushed it back flat when the job was done. We kept that hinged arm and the one supporting wire, and hung a single bare bulb from the tip instead of a hook.
Key Features
Long Pivoting Arm
A 110cm/43.3″ arm pivots at the wall, so you can swing the light out over a table or chair.
Wire-Supported Frame
A single taut wire runs from the wall to the tip of the arm and holds it level.
Bare Bulb, Black Metal
A black metal frame holds one exposed bulb, with no shade in the way of the light.
Size & Fit
| Part | Measurement |
|---|---|
| Overall | L 110cm x H 30cm / L 43.3″ x H 11.8″ |
Specifications
Fixture Type
Swing-arm wall sconce · 1 light
Materials & Finish
Metal frame in Black; Metal support wire
Light Source
E26 or E27 × 1, bulb included · Warm Light (3000K) · exposed bulb
Installation
Hardwired to a wall junction box · damp rated for bathrooms and covered outdoor areas
Care
Turn off and let the bulb cool · wipe the metal with a soft dry cloth
Certification
Certified: North America · Australia · Europe · Middle East
Design Style
Best For
Over a Dining Table, Reading Corner, Living Room, Home Office, Covered Porch
FAQ
Does the arm move?
Yes. The arm pivots at the wall, so you can swing the light out over a table, a sofa or a reading chair, then turn it back toward the wall when you don’t need it.
How much room does it need?
The arm is 110cm/43.3″ long, so leave that much clear space in the direction it swings. It works well beside a dining table, over a sofa or in a reading corner where a ceiling light is not possible.
Can I use it in a bathroom or outdoors?
Yes. It is damp rated, so it can go in a bathroom or a covered outdoor area such as a porch under a roof. Keep it out of direct shower spray and rain.
Is a bulb included?
Yes. It comes with one E26 or E27 bulb in warm 3000K light. Since the bulb is exposed, a decorative globe or vintage-style LED bulb works well when you replace it. The sconce is hardwired, so we recommend a licensed electrician for installation.
